Tips on How to Ship a Push-Type Lawnmower

shipping a lawnmowwer

Being a motorized machine that runs on combustible fuel, a lawnmower must be properly prepared before getting packed and shipped to its new destination.

Here are helpful tips on how to prepare, pack, and ship a push-type lawnmower to ensure that it safely reaches its destination without creating havoc or hurting shipping personnel:

1. Make sure to clean the lawnmower thoroughly before packing it.

2. Remove all trapped grass or dirt under the blades.

3. Remove all gas and oil from the lawnmower.

4. Be sure to put all hazardous and flammable liquids in appropriate containers and not just let them flow in water drains.

5. Follow your local community’s environmental regulations when disposing of these materials.

6. Wipeout any drop of gas and oil on the lawnmower with a dry rug. If not properly managed, even little amount of these liquids can ignite when exposed to heat and cause danger.

7. Just to be safe, disconnect the spark plug to avoid accidents. Even if fuel was drained out of the lawnmower, it can still have combustible built-up gas fumes inside the tank. If the spark plug is disconnected, you can be sure that nothing untoward could happen.

8. To make packing easier, remove or collapse the lawn mower’s push handle.

9. Put any removed parts in a zip lock bag and attach it to the mower with packing tape.

10. Wrap the mower in bubble wrap and place it in an appropriately sized shipping box. Fill any empty spaces inside the box with packing peanuts to ensure that the mower will not shift around during transit.

Close, seal, and attach address and labels on the sides of the box.  Bring the package to your local shipping company.

Leave a Comment

Your email address will not be published. Required fields are marked *